정현욱 교수
학력 : 고려대학교, 박사
연구분야 : 유변학, 코팅공정
연구실 : 공학관 221호 (TEL) 3290-3306
E-mail : hwjung@grtrkr.korea.ac.kr
 
약력
 
- 1993년 고려대학교 화학공학과 학사
- 1995년 고려대학교 화학공학과 석사
- 1999년 고려대학교 화학공학과 박사
- 1999-2000년 : 고려대학교 화학공학과 Post-doc
- 2000-2001년 : University of Minnesota, Post-doc
- 2001-2003년 : 고려대학교 유변공정연구센터, 연구교수
- 2003년 - 현재 : 고려대학교 화공생명공학과 교수
 
연구분야
 
- Coating process fundamentals
- Nonlinear dynamics and stability of rheological processes
- Extensional rheology of complex fluids
- Bifurcation theory (Hopf bifurcation)
- Computational fluid dynamics
- Microflows
 
주요 논문
 

- H.S. Ji, W.-G. Ahn, I. Kwon, J. Nam, H.W. Jung, "Operability coating window of dual-layer slot coating process using viscocapillary model," Chem. Eng. Sci., 143, 122-129 (2016).

- I. Kwon, M.-S. Chun, H.W. Jung, J.C. Hyun, "Determination of draw resonance onsets in tension-controlled viscoelastic spinning process using transient frequency response method," J. Non-Newtonian Fluid Mech., 228, 31-37 (2016).

- W.-G. Ahn, S. H. Lee, J. Nam, H.W. Jung, "Effect of flow rate variation on the frequency response in slot coating with upstream sloped die geometry," Korean J. Chem. Eng., 37(7), 1218-1221 (2015).

- J.W. Hwang, S.M. Noh, B. Kim, H.W. Jung, "Gelation and crosslinking characteristics of photo-polymerized poly(ethylene glycol) hydrogels," J. Appl. Polym. Sci., 132, 41939 (2015).

- S.M. Noh, J.H. Nam, J. Oh, H.W. Jung, "Scratch and recovery characteristics of automotive clearcoats containing blocked polyisocyanate crosslinkers," J. Coat. Technol. Res., 12(1), 85-95 (2015).

- J.W. Hwang, K.N. Kim, S.M. Noh, H.W. Jung, "The effect of thermal radical initiator derived from O-imino-isourea on thermal curing characteristics and properties of automotive clearcoats," J. Coat. Technol. Res., 12(1), 177-186 (2015).

- S.Y. An*, D.G. Lee*, Lee, J.W. Hwang, K.N. Kim, J.H. Nam, S.M. Noh, H.W. Jung, J. Oh, "Photo-induced thiol-ene polysulfide-crosslinked materials with tunable thermal and mechanical properties," J. Polym. Sci. Part A, 52(21), 3060-3068 (2014)

- S. Shin, J.M. Lee, J.W. Hwang, H.W. Jung, N.S. Nho, K.B. Lee, "Physical and rheological properties of deasphalted oil produced from solvent deasphalting," Chem. Eng. J., 257, 242-247 (2014).

- J.Y. Lee, M.S. Yi, H.C. Jeong, J.T. Kim, J.H. Nam, S.M. Noh, H.W. Jung, "Characterization of clearcoats containing phosphoric acid-functionalized acrylic polyols for automotive pre-coated metal sheet coatings," J. Coat. Technol. Res., 11, 697-710 (2014).

- J. Choi, J.-W. Choi, D.J. Suh, J.-M. Ha, J. W. Hwang, H.W. Jung, K.Y. Lee, H-C Woo, “Production of brown algae pyrolysis oils for liquid biofuels depending on the chemical pretreatment methods,” Energy Conversion and Management, 86, 371-378 (2014).

- S. Park, J.W. Hwang, K.N. Kim, G.S. Lee, J.H. Nam, S.M. Noh, H.W. Jung, "Rheology and curing characteristics of dual-curable clearcoats with hydroxyl functionalized urethane methacrylate oligomer: Effect of blocked isocyanate thermal crosslinkers," Korea-Australia Rheology J., 26, 159-167 (2014).

- N. Chan, H.W. Jung, S.M. Noh, J. Oh, "Functional amphiphilic oligo(ethylene oxide) methacrylate based block copolymers: synthesis by ARGET ATRP and aqueous mecellization," Polym. Int., 63, 858-867 (2014).

- S.H. Lee, S.J. Kim, J. Nam, H.W. Jung, J.C. Hyun, "Effect of sloped die lip geometry on the operability window in slot coating flows using viscocapillary and two-dimensional models," Journal of Coatings Technology and Research, 11(1), 47-55 (2014).

- G.H. Han*, S.H. Lee*, W-G Ahn, J. Nam, H.W. Jung, "Effect of shim configuration on flow dynamics and operability windows in stripe slot coating process," Journal of Coatings Technology and Research, 11(1), 19-29 (2014).

- S.Y. An, J.W. Hwang, K.N. Kim, H.W. Jung, S.M. Noh, J. Oh, "Multifunctional linear methacrylate copolymer polyenes having pendant vinyl groups: synthesis and photo-induced thiol-ene crosslinking polyaddition," J. Polym. Sci.-Polym. Chem., 52, 572-581 (2014).

- J.Y. Lee, J.M. Sung, K. Yoon, M.-S. Chun, H.W. Jung, "Debye screening effect on scaling behavior of longest relaxation time of biological polyelectrolyte chain," Bull. Korean Chem. Soc., 34, 3703-3708 (2013).

- Q. Zhang, J.W. Hwang, K.N. Kim, H.W. Jung, S.M. Noh, J.K. Oh, "New photo-induced thiol-ene crosslinked films based on linear methacrylate copolymer polythiols," J. Polym. Sci. Part A: Polym. Chem., 51, 2860-2868 (2013).

- J.W. Hwang, K.N. Kim, G.S. Lee, J.H. Nam, S.M. Noh, H.W. Jung, "Rheology and curing characteristics of dual-curable automotive clearcoats using thermal radical initiator derived from O-imino-isourea and photo-initiator," Prog. Org. Coat., 76, 1666-1673 (2013).

- I.J. Lee, S. Park, S.M. Noh, H.W. Jung, J.M. Park, "Rheology and roll coating dynamics of metallic basecoats for automotive pre-coated metal sheet," Prog. Org. Coat., 76, 917-923 (2013).

- J.Y. Lee*, J.W. Hwang*, H.W. Jung, S.H. Kim, S.J. Lee, K. Yoon, D. Weitz, "Fast dynamics and relaxation of colloidal drops during the drying process using multi-speckle diffusing wave spectroscopy," Langmuir, 29(3), 861-866 (2013).

- H.M. Kim, J.S. Lee, H.W. Jung, and J.C. Hyun, "Frequency response analysis of non-isothermal film blowing process using transient simulation," J. Appl. Polym. Sci., 123, 3028-3035 (2012).

- S.M. Noh, Jae W. Lee, Joon H. Nam, Ki H. Byun, J.M. Park, H.W. Jung, “Dual-curing behavior and scratch characteristics of hydroxyl functionalized urethane methacrylate oligomer for automotive clearcoats,” Progress in Organic Coatings, Accepted (2012).

- S.M. Noh, J.W. Lee, J.H. Nam, J.M. Park, H.W. Jung, “Analysis of scratch characteristics of automotive clearcoats using carwash and nano-scratch tests,” Progress in Organic Coatings, In Print (2012).

- J. Nam, H. Lim, D. Kim, H.W. Jung, and S. Shin, "Continuous separation of microparticles in a microfluidic channel via the elasto-inertial effect of non-Newtonian fluid," Lab on a Chip, Accepted (2012).

- H. Son, H. Jin, S.R. Choi, H.W. Jung, and S. Park “Vibrational probing of ion equilibrium and dynamics in N, Ndimethylformamide,” Submitted to Physical Chemistry Chemical Physics (2011).

- H.J. Koh, I. Kwon, H.W. Jung, and J.C. Hyun, “Operability window of slot coating using viscocapillary model for Carreau-type coating liquids,” Submitted to Korea-Australia Rheol. J. (2011).

- S.M. Noh, J. Min, J.W. Lee, H.W. Jung, and J.M. Park, “The application of dual-function microgels in UV/thermal dual-cure clear coats,” submitted to J. Appl. Polym. Sci. (2011).

- J.H. Kim, I.J. Lee, S.M. Noh, C.Y. Kang, J.H. Nam, H.W. Jung, J.M. Park, “Dynamics and instability in roll coating process with paints for automotive,” Polymer-Korea, 35, 574-579 (2011).

- J.Y. Lee, M.-S. Chun, H.W. Jung, J.C. Hyun, “Single chain dynamics of sub-micron sized wormlike polyelectrolyte in flow fields,” submitted to Phys. Rev. E (2011).

- S.H. Lee, S.I. Youn, J.S. Lee, H.W. Jung, J.C. Hyun, “Effect of air pressure difference on the stability and sensitivity of simplified curtain drawing flow,” J. Chem. Eng. Japan, 44, 524 (2011).

- I.Y. Kwon, J.S. Lee, H.W. Jung, and J.C. Hyun, “Application of continuation method for tracking steady-state contours in viscoelastic film blowing,” Korea-Australia Rheol. J. 23, 113 (2011).

- S.H. Lee, H.J. Koh, B.K. Ryu, S.J. Kim, H.W. Jung, J.C. Hyun, “Operability coating windows and frequency response in slot coating flows using a viscocapillary model,” Chem. Eng. Sci., 66, 4953-4959 (2011).

- J.Y. Lee, H.W. Jung, J.C. Hyun, M-S Chun, “Lateral displacement of DNA molecule in abrupt 90o microbends,” J. Korean Phys. Soc., 58, 125-131 (2011).

- D. Jo, J. Jeon, J.W. Hwang, J.Y. Lee, H.W. Jung, S.H. Kim, “Optimization of physical parameters of SOFC electrode using electrochemical model,” Korean J. Chem. Eng., 28, 1844-1850 (2011).

- J.S. Lee, H.W. Jung, and J.C. Hyun, “Nonlinear dynamic behavior of nonisothermal film blowing process under constant bubble pressure condition,” AIChE J., 57, 3565-3570 (2011).

- J.W. Hwang, J.Y. Lee, D.H. Cho, H.W. Jung, S.H. Kim, "Polarization Characteristics and Fuel Utilization in Anode-supported Solid Oxide Fuel Cell Using Three-dimensional Simulation," Korean J. Chem. Eng., 28, 143-148 (2011).

- H.W. Jung, J.S. Lee, “Numerical simulations on extensional deformation processes and their industrial applications: Chaotic motion in the isothermal film casting process,” Korea-Australia Rheol. J., 23, 59-65 (2011).

- A.R. Cho, D.M. Shin, H.W. Jung, J.C. Hyun, J.S. Lee, D. Cho, and Y.L. Joo, “Effect of annealing on the crystallization and properties of electrospun PLA and nylon 6 fibers,” J. Appl. Polym. Sci., 120, 752-758 (2011).

- Lee, J. S., H. W. Jung, and J. C. Hyun, “Transient solutions of nonlinear dynamics in film blowing accompanied by flow-induced crystallization (FIC),” J. Rheol., 55, 257-271 (2011).

- J.H. Lee, S.K. Han, J.S. Lee, H.W. Jung, and J.C. Hyun, “Ribbing instability in rigid and deformable forward roll coating flows,” Korea-Australia Rheol. J., 22, 75-80 (2010).

- H.H. Lee, Y.S. Song, J.Y. Lee, H.W. Jung, and S.W. Kim, “Rheological properties of culture broth of Acremonium chrysogenum M35 in baffled flasks with glass beads,” Korea-Australia Rheol. J., 22, 52-58 (2010).

- J.H. Yun, M-S Chun, and H.W. Jung, “The geometry effect on steady electrokinetic flows in curved rectangular microchannels,” Phys. Fluids, 22, 052004 (2010).

- H.Y. Park, J.W. Hwang, K.T. Park, S. Kim, Y.U. Jeong, H.W. Jung, and S.H. Kim, “Effect of process conditions on dynamics and performance of PEMFC: Comparison with experiments,” Thin Solid Films, 518(22), 6505-6509 (2010).

- J.H. Yun, D.M. Shin, J.S. Lee, H.W. Jung, J.C. Hyun, “Sensitivity of spinning process with flow-induced crystallization kinetics using frequency response method,” Korean J. Chem. Eng., 27(1), 37-44 (2010).