Hyun Wook Jung
Ph.D., Chemical Engineering, Korea University
Primary Research Area : Rheology, Rheological Processes
Office : Engineering Building, 221 (TEL) 3290-3306
E-mail : hwjung@grtrkr.korea.ac.kr
 
Education
 
- 1993 B.S. Dept. of Chemical Engineering, Korea University
- 1995 M.S. Dept. of Chemical Engineering, Korea University
- 1999 Ph.D. Dept. of Chemical Engineering, Korea University
- 1999 - 2000 : Postdoctoral Fellow, Dept. of Chemical Engineering, Korea University
- 2000 - 2001 : Postdoctoral Fellow, Dept. of Chemical Eng. & Materials Sci., Univ. of Minnesota
- 2001 - 2003 : Research Professor, Applied Rheology Center, Korea University
- 2003 - Present : Professor, Dept. of Chemical and Biological Engineering, Korea Univeristy
 
Research Area
 
- Coating process fundamentals
- Nonlinear dynamics and stability of rheological processes
- Extensional rheology of complex fluids
- Bifurcation theory (Hopf bifurcation)
- Computational fluid dynamics
- Microflows
 
Publications
 

- H.M. Kim, J.S. Lee, H.W. Jung, and J.C. Hyun, "Frequency response analysis of non-isothermal film blowing process using transient simulation," J. Appl. Polym. Sci., 123, 3028-3035 (2012).

- S.M. Noh, Jae W. Lee, Joon H. Nam, Ki H. Byun, J.M. Park, H.W. Jung, ¡°Dual-curing behavior and scratch characteristics of hydroxyl functionalized urethane methacrylate oligomer for automotive clearcoats,¡± Progress in Organic Coatings, Accepted (2012).

- S.M. Noh, J.W. Lee, J.H. Nam, J.M. Park, H.W. Jung, ¡°Analysis of scratch characteristics of automotive clearcoats using carwash and nano-scratch tests,¡± Progress in Organic Coatings, In Print (2012).

- J. Nam, H. Lim, D. Kim, H.W. Jung, and S. Shin, "Continuous separation of microparticles in a microfluidic channel via the elasto-inertial effect of non-Newtonian fluid," Lab on a Chip, Accepted (2012).

- H. Son, H. Jin, S.R. Choi, H.W. Jung, and S. Park ¡°Vibrational probing of ion equilibrium and dynamics in N, Ndimethylformamide,¡± Submitted to Physical Chemistry Chemical Physics (2011).

- H.J. Koh, I. Kwon, H.W. Jung, and J.C. Hyun, ¡°Operability window of slot coating using viscocapillary model for Carreau-type coating liquids,¡± Submitted to Korea-Australia Rheol. J. (2011).

- S.M. Noh, J. Min, J.W. Lee, H.W. Jung, and J.M. Park, ¡°The application of dual-function microgels in UV/thermal dual-cure clear coats,¡± submitted to J. Appl. Polym. Sci. (2011).

- J.H. Kim, I.J. Lee, S.M. Noh, C.Y. Kang, J.H. Nam, H.W. Jung, J.M. Park, ¡°Dynamics and instability in roll coating process with paints for automotive,¡± Polymer-Korea, 35, 574-579 (2011).

- J.Y. Lee, M.-S. Chun, H.W. Jung, J.C. Hyun, ¡°Single chain dynamics of sub-micron sized wormlike polyelectrolyte in flow fields,¡± submitted to Phys. Rev. E (2011).

- S.H. Lee, S.I. Youn, J.S. Lee, H.W. Jung, J.C. Hyun, ¡°Effect of air pressure difference on the stability and sensitivity of simplified curtain drawing flow,¡± J. Chem. Eng. Japan, 44, 524 (2011).

- I.Y. Kwon, J.S. Lee, H.W. Jung, and J.C. Hyun, ¡°Application of continuation method for tracking steady-state contours in viscoelastic film blowing,¡± Korea-Australia Rheol. J. 23, 113 (2011).

- S.H. Lee, H.J. Koh, B.K. Ryu, S.J. Kim, H.W. Jung, J.C. Hyun, ¡°Operability coating windows and frequency response in slot coating flows using a viscocapillary model,¡± Chem. Eng. Sci., 66, 4953-4959 (2011).

- J.Y. Lee, H.W. Jung, J.C. Hyun, M-S Chun, ¡°Lateral displacement of DNA molecule in abrupt 90o microbends,¡± J. Korean Phys. Soc., 58, 125-131 (2011).

- D. Jo, J. Jeon, J.W. Hwang, J.Y. Lee, H.W. Jung, S.H. Kim, ¡°Optimization of physical parameters of SOFC electrode using electrochemical model,¡± Korean J. Chem. Eng., 28, 1844-1850 (2011).

- J.S. Lee, H.W. Jung, and J.C. Hyun, ¡°Nonlinear dynamic behavior of nonisothermal film blowing process under constant bubble pressure condition,¡± AIChE J., 57, 3565-3570 (2011).

- J.W. Hwang, J.Y. Lee, D.H. Cho, H.W. Jung, S.H. Kim, "Polarization Characteristics and Fuel Utilization in Anode-supported Solid Oxide Fuel Cell Using Three-dimensional Simulation," Korean J. Chem. Eng., 28, 143-148 (2011).

- H.W. Jung, J.S. Lee, ¡°Numerical simulations on extensional deformation processes and their industrial applications: Chaotic motion in the isothermal film casting process,¡± Korea-Australia Rheol. J., 23, 59-65 (2011).

- A.R. Cho, D.M. Shin, H.W. Jung, J.C. Hyun, J.S. Lee, D. Cho, and Y.L. Joo, ¡°Effect of annealing on the crystallization and properties of electrospun PLA and nylon 6 fibers,¡± J. Appl. Polym. Sci., 120, 752-758 (2011).

- Lee, J. S., H. W. Jung, and J. C. Hyun, ¡°Transient solutions of nonlinear dynamics in film blowing accompanied by flow-induced crystallization (FIC),¡± J. Rheol., 55, 257-271 (2011).

- J.H. Lee, S.K. Han, J.S. Lee, H.W. Jung, and J.C. Hyun, ¡°Ribbing instability in rigid and deformable forward roll coating flows,¡± Korea-Australia Rheol. J., 22, 75-80 (2010).

- H.H. Lee, Y.S. Song, J.Y. Lee, H.W. Jung, and S.W. Kim, ¡°Rheological properties of culture broth of Acremonium chrysogenum M35 in baffled flasks with glass beads,¡± Korea-Australia Rheol. J., 22, 52-58 (2010).

- J.H. Yun, M-S Chun, and H.W. Jung, ¡°The geometry effect on steady electrokinetic flows in curved rectangular microchannels,¡± Phys. Fluids, 22, 052004 (2010).

- H.Y. Park, J.W. Hwang, K.T. Park, S. Kim, Y.U. Jeong, H.W. Jung, and S.H. Kim, ¡°Effect of process conditions on dynamics and performance of PEMFC: Comparison with experiments,¡± Thin Solid Films, 518(22), 6505-6509 (2010).

- J.H. Yun, D.M. Shin, J.S. Lee, H.W. Jung, J.C. Hyun, ¡°Sensitivity of spinning process with flow-induced crystallization kinetics using frequency response method,¡± Korean J. Chem. Eng., 27(1), 37-44 (2010).